Grease Fittings SAE J-534
Grease Fittings SAE J-534
Grease Fittings SAE J-534
Grease Fittings SAE J-534
Grease Fittings SAE J-534
Grease Fittings SAE J-534
Grease Fittings SAE J-534
Grease Fittings SAE J-534

Grease Fittings according to SAE J-534

0 out of 5
( There are no reviews yet. )

Grease Fittings according to SAE J-534

ŞANLI Grease Nipples A range of grease nipples in stainless steel or steel metric or imperial threads hydraulic button industrial button or concave heads are available.Mild steel case hardened head. Zinc plated. Stress relieving carbon steel spring. Carbon

Category: Tags: , , , ,

Description

Grease Fittings according to SAE J-534

Specifications:

Standard: SAE-J 534
Hardness: 83 HR15 N minimum according to rockwell hardness test procedure
Thread: parallel, taper
Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated

1. A metal grease fitting/grease nipple/zerk fitting used in mechanical systems to feed lubrication grease under moderate to high pressure between frictional parts.
2. Ball check in the head prevents dirt and grit from getting into the fitting.
3. Heavier wall thickness for extra strength.
4. fitting profile and dimensions are comply to SAE, DIN, BS,JIS, & IS standards.
5. The SAE-standard for hydraulic-type grease fittings requires a tapered thread and standard head-Ø is 6.6 mm.
Special Information
For a better overview we added the international Alemite-reference numbers to our grease fittings.
A general comparison of the relevant types you will find
>> here !
Hydraulic-Type Grease Fittings H according to SAE J-534
>> Type H1
>> Type H2
>> Type H3
>> Type H/S – with self-forming thread
>> Type Ha – drive-in-type
Flush-type grease fittings
>> Type D1 + DV1

 

1 review for Grease Fittings according to SAE J-534

  1. Şanlı Gresörlük –

    SANLI Grease Fittings according to SAE J-534
    In general, our hydraulic-type grease fittings according to SAE are made of steel, case-hardened, zinc-plated, passivated and featured with a special surface treatment. For safety reasons and in order to avoid abrasion wear, the standard for SAE-grease fittings demands a specific surface hardness of 83 HR15 N minimum according to Rockwell hardness procedure. Therefore, we operate this decisive process in our own curing oven. We offer various standard types also in stainless steel SST303.
    http://www.sanligresorluk.com

Add a review

HYDRAULIC GREASE NIPPLES WITH SELF-FORMING THREAD ACCORDING TO SAE J-534

In general, our hydraulic-type grease fittings according to SAE are made of steel, case-hardened, zinc-plated, passivated
and featured with a special surface treatment. For safety reasons and in order to avoid abrasion wear, the standard for
SAE-grease fittings demands a specific surface hardness of 83 HR15 N minimum according to Rockwell hardness
procedure. Therefore, we operate this decisive process in our own curing oven. We offer various standard types also in
stainless steel SST303.